• 李鑫

    工商管理系/助理教授/硕导

    办公室电话:0755-26050737

教师简介

科学研究

主讲课程

社会服务

媒体报道

教师简介

个人主页:www.stelee.com

李鑫,博士,深圳大学管理学院工商管理系助理教授,硕士生导师。

入选深圳高层次海外人才”孔雀计划”。

于香港城市大学(CityU)系统与工程管理系(SEEM)获得博士学位,之前分别于上海交通大学(SJTU)工业工程与物流管理系(IELM)和华中科技大学(HUST)工业工程系(IE)获得硕士和学士学位。

主持国家自然科学基金项目1项,省部级科研基金项目1项;作为核心成员参与国家自然科学基金项目2项。发表三大检索(SCI/EI/ISTP)学术论文20余篇。国际SCI期刊IEEE Transactions on Automation Science and Engineering;IEEE Transactions on Industrial Informatics;IEEE Transactions on Systems, Man and Cybernetics: Systems;International Transactions in Operational Research;International Journal of Production Research;European Journal of Industrial Engineering;Neural Computing and Applications等和中文期刊《上海交通大学学报》等,审稿人。

 

教育经历

2014 博士 香港城市大学 系统工程与工程管理系

2010 硕士 上海交通大学 工业工程与物流管理系

2007 学士 华中科技大学 工业工程系

 

工作经历

2016至今 深圳大学管理学院工商管理系 助理教授、硕士生导师

2014–2016 香港理工大学 工业与系统工程系 副研究员(Research Associate)

 

研究方向(商业分析与运营管理)

理论方法:离散最优与整数规划、优化算法(设计、分析、应用)

应用背景:医疗服务系统(康复治疗等)运作调度、含运输设备的复杂智能制造系统建模与优化

 

获得荣誉

深圳大学2018-2019年度优秀教师

深圳大学本科实习优秀指导教师

香港城市大学博士研究生杰出学术表现奖

代表性期刊论文

13.Xin LI, Z.X. WANG, Felix T. S. CHAN, S. H. CHUNG (2019). ” A genetic algorithm for optimizing space utilization in aircraft hangar shop,”International Transactions in OperationalResearch , 26(5): 1655-1675. (JCRQ2, SCI/SSCI, IF[2018]= 2.341)

12.Xin LI, Jin WANG, Richard Y. K. FUNG (2018).“Approximate dynamic programming approaches for appointment scheduling with patient preferences,”Artificial Intelligence in Medicine, 85: 16-25. (JCRQ1, SCI, IF[2018] = 3.574)

11.Xin LI, Richard Y. K. FUNG (2018). “A dynamic scheduling algorithm for single-armed two-cluster tools with flexible processing times,”Engineering Optimization, 50(2): 329-346. (JCRQ2, SCI, IF[2018] = 1.809)

10.Xin LI, Richard Y. K. FUNG (2017). “Optimal multi-degree cyclic solution of multi-hoist scheduling without overlapping,”IEEE Transactions on Automation Science andEngineering , 14(2):1064-1074. (JCRQ1, SCI, IF[2017] = 3.667)

9.Xin LI, Richard Y. K. FUNG (2016). “OptimalK-unit cycle scheduling of two-cluster tools with residency constraints and general robot moving times,”Journal of Scheduling, 19(2): 165-176. (JCRQ3, SCI, IF[2016] = 1.153)

8.Xin LI, Felix T. S. CHAN, S. H. CHUNG (2015).“Optimal multi-degree cyclic scheduling of multiple robots without overlapping in robotic flowshops with parallel machines,”Journal of ManufacturingSystems . 36: 62-75. (JCRQ1,SCI,IF[2015] = 2.240)

7. Bing-hai ZHOU,Xin LI, Richard Y. K. FUNG (2015). “Dynamic scheduling of photolithography process based on Kohonen neural network,”Journal of IntelligentManufacturing. 26(1): 73-85.(JCRQ2,SCI,IF[2015] = 1.995)

6.Xin LI, Felix T. S. CHAN, Ben NIU (2015).“Optimal multi-degree cyclic scheduling of reentrant electroplating lines including multiple hoists without overlapping,”International Journal ofInnovation in Management.3(1): 9-20.

5.Xin LI, Richard Y. K. FUNG (2014). “A mixed integer linear programming solution for single hoist multi-degree cyclic scheduling with reentrance,”Engineering Optimization. 46(5): 704-723. (JCRQ3,SCI,IF[2014] = 1.076)

4. Bing-hai ZHOU,Xin LI(2012). “Try and error-based scheduling algorithm for cluster tools of wafer fabrications with residency time constraints,”Journal of Central South University. 19(1): 187-192. (JCRQ3,SCI, IF[2014] = 0.434)

3. Bing-hai ZHOU,XinLI (2013). “Heuristic tabu search scheduling algorithm for wet-etching systems in semiconductor wafer fabrications,”High Technology Letters. 19(2): 111-116. (EI)

2.李鑫,周炳海,陆志强(2009).“基于事件驱动的集束型晶圆制造设备调度算法.”上海交通大学学报.43(6): 898-901.(EI)

1.李鑫,周炳海,陆志强(2009).“基于驻留约束的晶圆蚀刻系统动态调度算法.”上海交通大学学报.43(11): 1742-1745.(EI)

 

代表性会议论文

[C11].XinLI,Yanchun PAN, Richard Y. K. FUNG (2019). “Optimal scheduling of the reentrant multi-degree cyclic multi-hoist scheduling problem,”2019 IEEEInternational Conference on Industrial Engineering and Engineering Management . Macau, China. Dec. 15-18.(accepted) 

[C10].XinLI, JinWANG, Yanchun PAN (2019). “A MILP model of scheduling physical therapies with coupled operations in a basic setting rehabilitation center,” The 16th International Conference on Service Systems and Service Management (ICSSSM2019)}. Shenzhen, China, July 13-15.(EI)

[C9]. Wei YANG, Yulan ZHOU, Ming ZHOU,XinLI,Yanchun PAN, (2019). “Sustainable Supply Chain Network Design Considering the Interactive Influence of the Multiproduct on the Production Capacity”,The16th International Conference on Service Systems and Service Management (ICSSSM2019).Shenzhen, China, July 13-15. (EI) 

[C8].XinLI,Suling LIU, Yanchun PAN, Hainan GUO (2018). “Surgery Scheduling Study of Deputy Surgeons and Assistants Based on MIP”,The 15thInternational Conference on Service Systems and Service Management (ICSSSM2018). Hangzhou, China, July  21-22. (EI) 

[C7]. Yanchun PAN,XinLI(correspondingauthor), Mingxia Zhang, Meirong Zhou, Yanting Duan (2017). “Multimodal Transportation Network Optimization with Environmental and Economic Performance Considered: An Ongoing Research”,The 14th InternationalConference on Service Systems and Service Management (ICSSSM2017). Dalian, China, June 16-18.(EI)

[C6].XinLI,Felix T. S. Chan, Ben Niu (2015). “Optimal multi-degree cyclic scheduling of reentrant electroplating lines including multiple hoists withoutoverlapping,”International Conference onInnovation and Management (IAM2015 Winter). Singapore, Feb. 3-6. 

[C5].XinLI, Richard Y. K. FUNG (2013). ”A mixed integer linear programming approach for multi-degree cyclic multi-hoist scheduling,”2013 AsiaPacific Industrial Engineering and Management Systems Conference. Cebu, Philippines, Dec.3-6, paper no.1288. 

[C4]. Jin WANG, Richard Y. K.FUNG,Xin LI(2013). ”An integer programming formulation for outpatient scheduling with patient preference,”2013Asia Pacific Industrial Engineering and Management Systems Conference. Cebu, Philippines, Dec.3-6, paper no.1166.

[C3].XinLI,Richard Y. K. FUNG. (2013) ”A mixed integer linear programming approach for multi-degree cyclic multi-hoist scheduling problems without overlapping,”2013IEEE International Conference on Automation Science and Engineering. Madison Wisconsin, USA, Aug. 17-21, pp. 274–279. (EI) 

[C2].XinLI,Richard Y. K. FUNG (2013). ”Scheduling single-armed cluster tools with time window constraints using differential evolution algorithm,”WorkshopsEvolutionary Techniques in Planning and Scheduling (EVOPS) in the 23rd International Conference on Automated Planning and Scheduling. Rome, Italy, Jun. 10-14,2013. 

[C1].XinLI,Richard Y. K. FUNG, Hongyi SUN (2011). ”An events-driven scheduling algorithm for two-cluster tools with processing time windows,”2011IEEE International Conference on Industrial Engineering and Engineering Management.Singapore, Dec. 6-9, pp. 1436-1440. (EI)

 

科研课题

主持科研项目

[3] 2019.01–2021.12,国家自然科学基金青年项目(71802139),负责人,在研

项目名称:双时间模式下考虑任务相关与资源抢占特性的复杂康复治疗过程集成调度研究

[2] 2017.01–2019.12,广东省自然科学基金-博士启动项目(2017A030310417),负责人,在研

项目名称:复杂多机器人自动化集成制造系统调度优化模型与算法研究

[1] 2016.06–2018.05,深圳大学自然科学基金(2016069),负责人,结题

项目名称:含加工时间窗的复杂机器人制造单元多元周期调度的建模与优化

 

参与科研项目

[2] 2019.01–2021.12,国家自然科学基金青年项目(71801158,负责人:林美燕),主要参与人,在研

项目名称:具有动态优先权的“虚拟养老院”资源优化配置研究

[1] 2018.01–2020.12,国家自然科学基金青年项目(71701136,负责人:范璧),主要参与人,在研

项目名称:基于概率最小二乘支持向量机的智能医疗决策系统研究

 

企业咨询项目

[1] 2019.04–2021.06,横向项目-深航商旅公司智库项目(SZA021-1903030),共同主持,结题

项目名称:广州机场柜台服务人员排班优化

课程讲授

本科:

概率论与数理统计(全英):2017年春季,2018年春季,2019年春季

复杂管理系统建模技术与应用:2019年春季

 

硕士:

数据、模型与决策:2019年春节

管理系统仿真与优化:2016年秋季

管理研究方法论:2016年秋季,2017年秋季,2018年秋季(主讲2次

Ad Hoc reviewer for International Journal of Production Research,  

IEEE Transactions on Industrial Informatics,  

European Journal of Industrial Engineering,

Neural Computing and Applications